Categories
success-stories

GSSN machine learning algorithm applicated to sport aircraft navigation

Sport aircraft cockpits offer pilots the instruments needed for precision pilotage, but often lack a navigation display suitable for navigation flights. The Czech company FUN AIR s.r.o. is addressing this situation by offering sport pilots its GPS navigation for mobile phones and tablets. The navigation has become one of the most widely used applications in this category due to its comprehensiveness and reliability.

FUN AIR s.r.o., has been working for a long time on the possibility of adding a function that simulates navigation on approach to landing using the Instrument Landing Sytem (ILS), a system that allows to maintain the correct angle of descent even in conditions of low visibility. In the civil aviation sector, this system is provided by radio localizers at the airport, which send a two-way signal to the guided aircraft to assess the vertical and horizontal deviation from the correct descent path. Simulation of the system using GPS navigation has not yet been possible because the horizontal deviation is too high.

ESA technology Broker CZ linked FUN AIR s.r.o. with Gianluca Caparra, ESA Radio Navigation System Engineer, who proposed to use the self-learning algorithm used by ESA to refine the vertical deviation of GPS navigation. FUN AIR s.r.o. has obtained a test license for this self-learning algorithm and has started validating its effectiveness for vertical deviation refinement in its air navigation.

The successful application of the algorithm will enable sport and hobby pilots to land safely even in low visibility conditions, and contributes to safer aviation.

Categories
success-stories

SPAD sensor utilization for compensatory devices for the visually impaired

Svarovsky, s.r.o. is the largest European manufacturer of white canes with a 20-year tradition. They produce circa 18,000 items annually, of which 90% of them are intended for export.
Czech Space Research Center company participated on the European Laser Timing project – ESA ACES experiment. This project used the principle of detecting the impact of a photon sent by a laser on a SPAD (Single Photon Avalanche Diode) sensor. The moment of photon impact is sensed by the SPAD detector with such a resolution that it allows the calculation of the distance with very high accuracy.
Svarovsky, s.r.o. decided to use this sensor technology to create a device that could be integrated into the handle of a blind cane and would allow the user to keep an awareness of their surroundings using an acoustic signal or vibration.
The project was scouted by Technology Centre Prague and supported by €60,000 from the ESA Spark Funding programme within the project ESA Technology Broker.

Categories
success-stories

Software for simulation and improved design of high data rate optical fibres components 

Argotech is a Czech research and development company specializing in optics, electronics, and mechanics. To improve services in the field of Photonics Integrated Circuits (PIC), the company sought cooperation with ESA Technology Broker. The company specialize on bidirectional optical components (BIDI) for high-speed communication on a single optical fibre.

To ensure the BIDI technology resistance, the company conducts simulations to test an electron flow and high-frequency signals and electromagnetic interference. However, these tests were very time demanding. The modelling could last up to 8 days. The company contacted ESA Technology Brokers in TC Prague who then brought Argotech into contact with the German company CST specializing in analytical software for electromagnetic components and systems.

Originally developed software was used for simulation and design optimalization of Photonics Integrated Circuits (PIC) which were used for duplex high data rate communication over a single optical fibre. By using this software optimized for space application design, the time to test a PIC design was reduced from days to hours, with more accurate calculations.

Reference: Packaging H2020 project PhLEXSAT.
Reference: Packaging H2020 project PhLEXSAT.
Reference: HF packaging H2020 project PhLEXSAT. Receiver @90GHz.
Reference: HF packaging H2020 project PhLEXSAT. Receiver @90GHz.
Reference: PhLEXSAT, mesh of 3D model in CST studio SW prior start of the HF simulation.
Reference: PhLEXSAT, mesh of 3D model in CST studio SW prior start of the HF simulation.
Categories
success-stories

Production of space radiation monitors for earthly applications

Technology transfer between ADVACAM s.r.o. and the Institute of Experimental and Applied Physics of the Czech Technical University in Prague (IEAP).

ADVACAM s.r.o., a company providing radiation imaging cameras and spectral imaging detectors for imaging solutions, was involved in activities to support technology transfer in the field of Space implemented by the Technology Centre Prague within the ESA Technology Broker project. As a result, the company cooperated with IEAP on a project to develop a pixel particle detector for radiation monitors for terrestrial applications. IEAP uses this technology on a license fee basis and they have entered foreign markets successfully with the new product.

Categories
success-stories

Statistical Energy Analysis (SEA) method used for space applications helps in transport industry

A leading innovator in virtual prototyping software Mecas ESI fostered an interior noise decrease in ŠKODA Transportation.

ŠKODA Transportation used the services of the Technology Centre Prague and the ESA Technology Broker project to identify potential solutions to its technology needs. Within the frame of acquired cooperation agreement, the company Mecas ESI has applied its know-how and experience in Statistical Energy Analysis (SEA) and vibro-acoustic simulation gained through participation in space industry projects and helped Czech transportation manufacturer to decrease interior noise levels in subway rail vehicles.

Categories
success-stories

Aerial archaeological map updated with satellite data

Czech software and systems engineering company Space Systems Czech upgraded an archaeology map of the Czech Republic for the Institute of Archaeology of the Czech Academy of Sciences, Prague.

Space Systems Czech is a company incubated within the BusinessRunway programme of the Technology Centre Prague. As part of the incubation, it uses the services of the ESA Technology Broker project to find new partners. Thanks to this, it has linked up with the Institute of Archaeology and applied its know-how in software development for critical infrastructure into a mapping system. During this process, errors and failures were removed due to knowledge of Big Data and GIS, additional functions were added.

The value of the technology transfer was €40.000.

Categories
success-stories

Polymeric systems for potting and encapsulation of hi-tech electronic parts

Czech pressure sensor and manufacturer BD Sensors has acquired a new potting and encapsulation material for electronic components using technology from Czech research and development company TOSEDA.

TOSEDA, a long-term client of Technology Centre Prague, has offered its production programme of innovative materials through the ESA Technology Broker project. BD Sensors responded to the offer by having a polymer system developed to encapsulate the electrical components of its pressure sensors.

Technology transfer was supported as a demonstration project and the transfer was completed. Its value was €45,000 and this represents TOSEDA’s additional sales up to 5% of turnover and BD Sensors’ additional sales up to 1% of turnover.

TOSEDA’s flexible casting resin system for electronic applications
TOSEDA’s 2K elastomeric system (20 kg) for semi-pilot testing
TOSEDA’s highly thermally conductive elastomeric system
TOSEDA’s flexible (left) and rigid (right) casting resin system for electronic applications